Tag: Plumbing

Residential Plumber

Plumber Montgomery TX installs, repairs, and maintains pipes and fixtures associated with heating and cooling in a home or other building. They can also interpret blueprints and building specifications and do work requiring soldering, brazing, welding, and/or rigging.


Residential plumbing issues are more accessible to diagnose and solve, as homeowners tend to use plumbing systems more regularly and will notice small leaks or problems sooner.

The plumbing system in a house is a network of pipes that distributes water to appliances like sinks, toilets and showers, while also removing wastewater. It is critical for our health and hygiene, yet it is often overlooked because of its behind-the-wall structure. A professional plumber can accurately install this system to ensure that your household has access to clean and sufficient water for use in cooking, washing and cleaning.

Plumbing systems are complex, with multiple subsystems including water supply pipes, drain pipes and sewer lines. Each pipe works independently and has its own function to play in the overall plumbing infrastructure of a home. Depending on the type of house and its location, some components of a plumbing system may be different from others. For example, houses with wells may have different piping structures than those that connect to public water and sewer systems.

Residential plumbing pipes are typically made from durable materials that can handle high volumes of pressure and varying temperatures. Copper pipes, for instance, are a popular choice because they can last up to 50 years without corroding. Another common option is PVC (polyvinyl chloride) pipes, which are flexible, easy to work with and can withstand different types of water temperatures. These pipes can even be used in outdoor applications. For homes that previously had polybutylene piping, a plumber can replace these with the more durable PEX (cross-linked polyethylene) pipes.

Other durable and effective piping materials include galvanized iron and cast iron. These are less expensive than copper and can still provide a long lifespan, though they may have potential problems with corrosion over time. Galvanized pipes tend to be narrower than other pipes, which can decrease the amount of water they are able to transport.

When it comes to a home’s drainage system, it is important to keep in mind the size of the septic tank and how that will affect sewage flow and disposal. A good plumber will be able to help you choose the right septic tank size based on the number of bathrooms in your home and the size of each toilet.

If you are building a new house, it’s a good idea to get the plumbing system installed before starting any interior decoration. This way, you’ll be able to move into the house with all the plumbing and electrical wiring in place, which will make your relocation easier on yourself and your family. It will also be more cost-effective to do this than to have the entire project reworked later on. A plumber can give you valuable insights into whether a classic or modern plumbing system is best for your home. Each has its own advantages and disadvantages, so it is important to weigh these pros and cons carefully before making your decision.

Classic Residential Plumbing

Having an efficient, functional plumbing system is one of the basic necessities in any home. However, homeowners often face a dilemma when choosing between time-tested traditional methods and cutting-edge solutions that cater to modern needs. It’s important to consider the pros and cons of each method, and consult with professional plumbers for expert guidance.

Classic residential plumbing offers advantages like reliability, cost-effectiveness, and the expertise of experienced professionals. On the other hand, it may have drawbacks including potential leaks, limited efficiency compared to newer alternatives, and higher maintenance requirements.

Unlike modern systems, classic residential plumbing is composed of metal pipes that are more prone to corrosion and can lead to issues such as leaks and clogs. This is why it’s important to regularly check and replace old components to avoid further problems.

In addition, classic plumbing systems typically use lead pipes or solder, which can pose health risks especially for children and babies. It’s recommended to have your home’s water tested for lead if you’re using classic plumbing, as a simple repair can significantly reduce the risk of health concerns.

On the other hand, modern plumbing systems offer a wide range of advantages including high efficiency, sustainability, and flexibility. They also tend to be more durable and easier to install compared to classic systems. However, these systems can be more expensive than their classic counterparts, and their energy efficiency isn’t always as good as the older systems.

Both systems have their merits, and the choice ultimately depends on your specific home’s requirements, budget, and priorities. A reliable plumber can assess your needs and recommend the right solution that will provide long-term benefits for your family.

The cost of replacing your pipes will vary depending on the size and age of your house, as well as how complex the installation process will be. For example, if you have galvanized pipes in your house, the installation will be more complicated than installing a newer pipe type, such as PEX or copper. Another factor that will influence the cost is the material used for the replacements. For example, copper is more expensive than PVC, but it’s an excellent choice for high-pressure situations and is unlikely to leak.


A residential plumber can help with many common issues that occur in the home, including clogged drains, toilets that don’t flush, and signs of water damage in the walls or ceiling. They can also offer bundled services that include inspections and maintenance of the entire plumbing setup, helping homeowners save money by fixing issues before they become worse.

Unlike commercial plumbers, residential plumbers usually communicate with the property owner directly rather than a manager or tenant. This allows them to work faster and make decisions more efficiently. They may still need to get approval from a higher-ranking member if the budget for a project is high, though.

Water Heater Repair Basics

Water heaters are familiar fixtures in many homes. They are big metal cylinders usually kept in the basement or utility room. If you have no hot water, check the circuit breaker or fuse in your home that serves your water heater. It may have tripped and needs to be reset.

Tank-Style Water Heaters


A traditional tank-style water heater has a gas or electric heating element. Hot water rises from the bottom of the tank, passes through a dip tube, and back to the top. From there, it goes through your home’s pipes and into your faucets. The tank also contains a temperature pressure relief valve that keeps pressure from building in the unit. Depending on the age of your water heater, it can start to experience issues. This may be due to wear and tear, corrosion, or a leak. If you notice an increase in your utility bills, a change in water temperature or unusual sounds coming from the water heater, it could be time to call in Plumbing Company Shreveport.

The first thing you should do is test the elements. There are two on most units, and they run an electrical current through them to heat the water. If these aren’t working, it may be because they are causing your circuit breaker to trip. Another possibility is that they have burned out or become shorted. Element replacement costs about $20 each. If this doesn’t solve the problem, it is possible that there is a thermostat or high-temperature cutoff switch issue. These can be difficult to diagnose and repair, and are best left to an experienced plumber.

Another common issue is a faulty dip tube. This tube transfers cool water to the bottom of the tank so it can be reheated by the lower element. If this tube is cracked or broken, it can cause cool water to mix with the hot water and reduce its overall temperature. A plumber can replace this tube, which shouldn’t be too expensive.

If you’re dealing with smells or discoloration in your water, it may be a sign that the anode rod is corroding and releasing sulfur into the water. You can try turning off the water for a few minutes and then re-turning it on. This should help get rid of the odor or discoloration. If not, the anode rod will need to be replaced.

While it’s possible to extend the life of a conventional water heater through regular maintenance, it will eventually wear out and need to be replaced. Our plumbing technicians can assess the condition of your tank-style water heater and recommend an appropriate replacement.


A thermostat is the control mechanism that keeps a water heater running when hot water is needed. The thermostat is usually located on the outside of the unit or in a cabinet at the top of the tank. If your water heater is acting up, you should check the thermostat first to make sure that it hasn’t tripped or that its dial isn’t set too high.

The thermostat works by detecting the temperature of the water and sending an electrical signal to turn the heating elements on or off depending on what it is reading. There are a few different types of thermostats, and each has its own way of working. One type uses a bimetallic strip that coils and uncoils based on the water’s temperature, triggering an electric switch to start the water heater. Another kind of thermostat, called a rod and tube thermostat, has two pieces of metal with dissimilar coefficients of thermal expansion that create proportional pressure on a diaphragm or piston assembly that actuates the electrical switch.

There is also a third kind of thermostat called a mercury switch, which has a vial of mercury with three wires inside it that make connections when tilted left or right. This kind of thermostat is less common than the others.

If you have an older water heater, the parts in it may be worn out or corroded. If this is the case, your water heater will probably need to be replaced.

A malfunctioning dip tube is another possibility for a faulty water heater. If the dip tube breaks, it could cause cold water to mix in with the hot water. Unless you’re comfortable replacing a dip tube, you should call a professional plumber to do it for you.

If your gas water heater is having problems, it’s possible that its pilot light has gone out. If this is the case, it’s important to follow the safety instructions in the manual that came with your water heater to relight the pilot light correctly. If this doesn’t fix the problem, it might be a sign that your thermocouple or gas control valve has failed.

Anode Rods

Anode rods are long metal rods, usually made of magnesium or aluminum. Their purpose is to attract the iron, limestone and rust in the water that would otherwise corrode the steel tank. This saves the water heater and keeps the water clean, but they do wear out after a while and need to be replaced periodically. You can determine when they are worn out by noticing a “rotten egg” smell or looking at the rod and seeing that it is quite corroded.

Depending on your model, the anode rod may be exposed or hidden within the tank. If the former, it may be covered by a plastic cap. On the latter, you may need to remove a screw and insulating material to expose it. The first step in removing the rod is to turn off the power and drain the water heater (if it has a gas valve, use the “vacation” setting on the pilot light to avoid relighting when you’re done).

Once you have the tank empty, loosen the hex head bolt with a socket wrench, using work gloves, as it will be hot. When the bolt is loosened, pull out the old anode rod. The sacrificial anode will likely be corroded to the point that you can no longer see it. If you have trouble getting the rod out, you can try bending it, though this will make it harder to replace in the future.

When installing the new anode, smear Teflon pipe thread sealant on the end that will be in contact with the tank to help prevent leaks. If you have limited space above the tank, consider purchasing a flexible anode rod instead of the traditional model; these are made from short segments that snap together like tent poles.

Place the anode rod into place, tighten the bolt and install a new plastic cap. Then drain and refill the tank to flush out any sediment that might have collected at the bottom of the tank. Be sure to turn on the power and water again after you’re finished working to ensure that everything is running correctly.

Flushing the Tank

It’s important to regularly flush your water heater tank, which removes mineral buildup and prevents a corrosive layer that reduces the tank’s capacity. This is one of the most common maintenance tasks that DIYers miss, but it can help you save money in the long run.

First, turn off the power to your water heater at the circuit breaker or fuse box. This is an important safety measure because water inside a hot water tank can cause scalding burns if touched. Then, open a hot water faucet in your home to prevent a vacuum that could keep water from flowing.

Then, attach a hose to the standard outside-style drain valve on the bottom of the tank. It’s typically located next to the thermostat control knob. Open the drain valve and allow the water to drain for about 10 minutes. Then close the drain valve.

Repeat this process until you have drained about four gallons of water from the tank. This should flush out most of the sediment, but you may need to drain more.

After you drain the tank, use a bucket to catch the water. If the water is cloudy or you still see sediment in the bucket, you may need to flush it again. Repeat the procedure until you have clear water and no sediment in the bucket.

Finally, flush the drain and anode rod. This is a simple task for a plumber, but you can do it yourself with the right equipment.

A faulty or improperly installed gas water heater can leak carbon monoxide, an odorless and tasteless but deadly gas that can poison your family if in sufficient concentrations. It’s also a fire hazard and must be repaired or replaced immediately.

The best way to avoid these problems is to have a plumber inspect and service your tank-style water heater twice a year, and perform routine maintenance on it in between. This will not only keep your water heater running efficiently but will lower your energy bills, too. If you notice signs of a malfunctioning water heater, like lack of hot water or strange smells and tastes in your home’s water, call the plumbing experts at Simpson Plumbing today.