decorative ceramic tiles 12x12

Top decorative ceramic tiles 12x12 resources

Subscribe for FREE to my "Tiling Resources List" and get our "27 Tiling Tips you don't want to miss" report + more than 120 Tiling Articles and many other Titiling Resources which can include more articles, providers details, software, tiling ideas and special offers that I'll find over the time.

I've spent hundreds of hours researching the internet to find all of those Tiling Articles & Resources and Now (for a limited time only) you can take advantage of all the hard work I did for Free! Well over $29 value! Simply fill the form & click on "Sign Up!".

Extracted from the article "5 steps to complete a successful ceramic tile installation"

Prepare the surface for a long lasting job before laying the ceramic tiles

The surface to be tiled (floor, wall or any other) will often need to be prepared, this can include work like filling, levelling, smoothing, priming and sometimes water proofing.

The right preparation will be directly affect the lifespan of the ceramic tile installation. Unless you want to be tiling again soon, you want to get this right from the start.

This is probably the most important point to ensure a long lasting tiling job. Don't rush it.

Laying the ceramic tiles safely

The technique of laying ceramic tiles is not especially difficult. It only takes a little bit of practice before anyone can easily master it. Clearing the room to be tiled before starting will help you to do the job safer and easier. Don't forget to wear your safety goggles when cutting or chipping tiles.

Laying ceramic tiles can also be a bit messy, if you don't want dust all over the house we suggest sealing the room you want to tile whenever possible. A large piece of plastic tacked to the door frame will do the job quite well.

Try not to allow any adhesive to get on your skin and never forget to read the manufacturers directions before even opening the tin. If some ends up on you, just clean it with water as soon as possible. Even though tile adhesives aren't usually abrasive, if you leave it for some time it may cause an allergic reaction.

Use a spirit level to help you with the depth & level of the tiles and spacers to maintain an even distance between them.

The finishing touches

Once the tile adhesive or mortar has cured (dried) and the tiles are firm and even, you can start with the finishing touches.

You'll have to fill the spaces between tiles with grout making sure you don't leave any gaps as these cause damp problems, in a shower for example.

The technique is very simple, use a rubber faced trowel to spread the grout and a cotton cloth to clean the excess grout from the tiles afterwards.

There are many different types of grouts; you'll have to choose the right one depending on the surface and chosen tile.

Now that you have your ceramic tiles laid down, you only need to take care of them, usually manufacturers provide information on taking care of their tiles and only minimal effort is required. Most household cleaning products will do the job well, if some particular stain is stubborn, there are many commercial stain removers, just make sure you use the right product for the right tile.

You are now closer to discovering how satisfying it can be handling a tile installation yourself, just follow these 5 steps to get the best result.

Read the whole article "5 steps to complete a successful ceramic tile installation"