ceramic tiles bright blue 12x12

Top ceramic tiles bright blue 12x12 resources

Subscribe for FREE to my "Tiling Resources List" and get our "27 Tiling Tips you don't want to miss" report + more than 120 Tiling Articles and many other Titiling Resources which can include more articles, providers details, software, tiling ideas and special offers that I'll find over the time.

I've spent hundreds of hours researching the internet to find all of those Tiling Articles & Resources and Now (for a limited time only) you can take advantage of all the hard work I did for Free! Well over $29 value! Simply fill the form & click on "Sign Up!".

Extracted from the article "Preparing your bathroom to lay ceramic tiles"

When the electrics or plumbing are very old (things like lead or iron plumbing and outdated wiring) I strongly recommend you up-date them even if they look fine. In doing this the risk of any problems in the future which could mean you would have to break your nice new tiled wall and start all over again are reduced and an expensive repair is avoided. So if you want a long lasting quality job remember to do this.

Make sure that the pipes securely fixed to the wall without excessive vibrations, otherwise you may get that annoying noise that, I am sure, you have heard somewhere when turning on a tap. Do you know what I mean?

Before going any further you should test the plumbing for leaks the easy way to do this is by simply restoring the water supply and checking for water leakages. However, the professional way to go is using a hydraulic testing tool (you can also hire this) to ensure that there will be no leakage of water later. Hydraulic testing should be performed at least 1.5 times the normal working pressure.

No need to say that if you find any leakages, simply fix them.

After you have repaired any plumbing or electrical work, you will have to look at the surfaces to be tiled.

Make sure the surface has no cracks or holes. Repair cracks with filler, holes better filled with something suitable depending on your surface. Allow the fillers to dry thoroughly. Plastering or rendering may be needed if the walls are badly damaged.

There should be no bumps on the surface and the wall should be plumb. It will be very difficult if not impossible to have a straight tiled wall if you have bumps on the wall.

If you are going to plaster or render it is always good practice to use some waterproof additives in the mix.

Preparation work is vital for success of your project and so the time spent doing it is worthwhile. Therefore, if you wish to have a successful project, remember to prepare it well.

Read the whole article "Preparing your bathroom to lay ceramic tiles"